3D Filament Polymaker 1.75mm PolyTerra PLA Dual 1kg Shadow Red (Black-Red)

3D Filament Gembird 1.75mm PLA-Plus 1kg Black (3DP-PLA+1.75-02-BK), 3D Filament Gembird 1.75mm ABS 1kg White (3DP-ABS1.75-01-W), 3D Filament Creality 1.75mm CR-PLA Silk 1kg Blue, Abs levy muovilevy musta 1000x490 3mm, 3D Filament Creality 1.75mm CR-TPU 1kg White, 3D Filament Creality 1.75mm CR-PETG 1kg Red, 3D Filament Spectrum Filaments 1.75mm PLA Premium 1kg Blue Lagoon (80048), Valkoiset muovitangot, 5 kpl, UV-hartsi, Väritön Plexi Pleksi -levy, leikattu mittojen mukaan, 2 mm, Plexi pleksilasi maitomainen opaalilevy mittojen mukaan 30cm x 20cm x 2mm, 3D Filament Bambu Lab 1.75mm PLA-CF 1kg Burgundy Red (14200), Spool, 3D Filament Bambu Lab 1.75mm ABS 1kg Black (40101), Refill, 3D Filament Creality 1.75mm CR-TPU 1kg Green, 3D Filament Rosa3D 1.75mm PET-G 1kg White

Sunlu PLA+ Silk DC B Go, 1.23 g/cm³, 164 °C, 50 MPa, 78 MPa, 11%, 57 °C, 54 °C, 7 g/10 min, 2600 MPa, 78 kJ/m², 0.02 mm, Sunlu PETG-filamentti PETG P, pinkki, 1.27 g/cm³, 2.7 kJ/m, 5.3 g/10min, 2226 MPa, 53 MPa, 77 MPa, 17.3%, 195 °C, 68 °C, Sunlu PETG-filamentti PETG SO, 1.27 g/cm³, 5.3 g/10min, 2.7 kJ/m, 2226 MPa, 53 MPa, 77 MPa, 17.3%, 195 °C, 68 °C, Sunlu PLA+ 2.0 Oak, 1,75mm, ±0,02mm, 300mm/s, 1,21g/cm³, 53,4MPa, 81,8MPa, 164°C, 3D-tulostimen materiaali, Anycubic High Speed PLA Filament IPHHSBK-106, 1kg, 1.75mm, 330m, musta, 40-250mm/s, ±0.02mm, 190-260°C, ELEGOO Mars 5 -tulostusalusta, tuotekoodi 50.102.0145, 1 kpl, yhteensopiva Mars 5 -tulostimen kanssa, kompakti, Elegoo ABS-filamentti 50.203.0644, harmaa, 85°C, kestävä, iskunkestävä, Anycubic TPU-filamentti IPHTPBK-102, 1kg, 1.23g/cm³, 95A, 34.4MPa, 697%, 195-230°C, 50-150mm/s, joustava, kulutusta kestävä, Sunlu PETG G, 1.27 g/cm³, 5.3 g/10min, 2.7 kJ/m, 2226 MPa, 53 MPa, 77 MPa, 17.3%, 195 °C, 68 °C, vihreä, Sunlu PLA+ Silk DC B Blu, 1.23 g/cm³, 164 °C, 50±4 MPa, 78±5 MPa, 11±3%, 57±3 °C, 7±2.5 g/10 min, 2600±300 MPa, 78±5 kJ/m², Anycubic Quick-Change FEP-kalvo Photon Mono M5s/M5s Pro/M7 Pro/M7, S020160, 10.1 tuumaa, 5 arkkia, FEP-materiaali, Sunlu PLA+ Silk DC R Blu, 1.23 g/cm³, 7±2.5 g/10 min, 2600±300 MPa, 50±4 MPa, 78±5 MPa, 11±3%, 164 °C, 78±5 kJ/m², 57±3 °C, Sunlu PLA+ 2.0 Cer, 1,75mm, ±0,02mm, 300mm/s, 1,21g/cm³, 164°C, 53,4MPa, 81,8MPa, 2740MPa, 20,3%, 19,8kJ/m², 53,8°C, keraaminen, Sunlu PLA+ 2.0 G, 1,75mm, ±0,02mm, 300mm/s, 1,21g/cm³, 7,8g/10min, 2740MPa, 53,4MPa, 81,8MPa, 20,3%, 164°C, 54°C, 19,8kJ/m², 53, Sunlu PLA+ 2.0 Be, 1,75mm, ±0,02mm, 300mm/s, 1,21g/cm³, 53,4MPa, 81,8MPa, 2740MPa, 19,8kJ/m², 164°C, 54°C, 53,8°C, 20,3%, 7